1.Introduction of the Product
 Implement national standards : JC500-92,The material is made up of two component which can react in the condition of pitch elasticizer, A component is slight-yellowy transparency liquid; and B component is black brilliant liquid. Both are innocuous, sans taste and environmental. Our products have these features: high strength, good elasticity, ability to resist the base body distortion, ability to resist alteration of temperature, strong bounding capacity; to the base body.
2.Mechanical Property
test and measurement |
high-class products |
acceptable end-products |
intensity (Mpa) |
>2.45 |
1.65 |
elongation percentage (%) |
>450 |
>350 |
Cold bending OK at (oC) |
-35 flawless |
-30 flawless |
solid material (%) |
≥94% |
Water impermeability |
0.3 (Mpa/30min) |
non (Mpa/30min) |
Ratio of heat dilation (%)≤ |
extension |
1 |
shorten |
4 |
6 |
Temporal hour of surface dry (h) |
<4 |
inadhesion |
temporal hour of body dry (h) |
<12 |
inadhesion |
3.Scope of Application
National major project, general waterproof project, basement, kitchen, toilet, tunnel, bathroom, and so on; the roofing own the special protection effects
4. Storage and Carriage
4.1 In carriage, no sunshine and rain; no fire and collision; holding the undamaged package
4.2 Air proof storage in Stackhouse; storage in aeration and shade place; no fire
5. Direction for Use
5.1 The sub-base must be compacted, level, non-loosening, non-peeling. Then execution of brush treatment can be put into effect.
5.2 A component and B component must be mixed in proportion equably.
5.3 Before solidification, no walking, no piling, no water contacting, no smoking, no fire harm
5.4 Brush application twice or thrice generally; thickness: 1.5mm-2mm; dosage :2.5kg/m2. Add single-glassedcloth can enhance intensity.
5.5 Attention: dilution of polyurethane must use our complement liquefier. It is not our business if you use the xylene/gasoline or other liquefier result in quality problem.
|
